Today the USPS sleigh brought me a gift. A 40mm DCOE Weber.
Saturday, December 19, 2020
Monday, December 14, 2020
WE ARE CALLING THE LAST PEDAL SETUP A LEARNING EXPERIENCE......
Looks like we are calling this one a learning experience...... :D
Besides the brake pedal, I'm going to be changing the gas pedal. I have decided to change out the carb setup from the duel stock carbs, to a 40mm DCOE Weber. I will be placing it between the head, with the air filter to the front. Giving it more of the Morgan 3 wheeler look.
Friday, December 11, 2020
PEDAL ASSEMBLY IS FINISHED
Today I finished the pedal assembly, And I happy with it. $40 or less, vs $300 -$400 for a store bought setup. I would rather make something, rather than buy it. unless there are other factors involved.
Tuesday, December 8, 2020
MORGAN PEDAL ASSEMBLY COMING ALONG
I started working on the pedal assembly. The base is 8" x 11". as well as the backing plate. The master cylinder is a 72 VW Beetle. The clutch is a straight cable setup. The gas on the other hand is a rocker two cable setup, one on the top of the pedal, and one on the bottom of the pedal. This is in association with the linkage setup for my dual carbs.
Subscribe to:
Posts (Atom)
-
This is the final post on front suspension for now, I made and welded new top wishbones. I also changed the upper and lower ball joint. all... -
Today I made the jig for the front wish bones, cutting an offset for size difference of the bushing tube. Then I made some mock upper and lo...